Leaderboard

I probably know a bit more than most on this as a couple of us have been putting in a lot of time (some more than I) trying to help in our own time in the back ground. The car was a non-runner being sold at a very low price for a Westfield of exportable age. It last had an MOT in 2020 and had been sat untouched ever since. James (who was selling the car) managed to get the car started and a video was seen of it ticking over (although not running particularly well). Using contacts from our end, a transport company was sourced for Nikos to get the car to the docks in Bristol and he had sorted the export paperwork. Rather than being container shipped, the car was being exported as a running car (i.e. was to be driven onto and off the ship by the dockworkers). The transport company did not start the car, they winched it onto and off their trailer and it was delivered safely. When the dock workers attempted to start the car they could not. It was assumed that they were not used to an old car running webers. At this point, a helpful member rang various local garages who could attend the dock to get the car started. Paul at Bristol Classics agreed to do this, arriving very early to try and start the car. Unfortunately when the car eventually started (after over 2 hours of fault finding) the carbs were so far out of tune a backfire caused the filters to catch fire. Thankfully Paul managed to extinguish the flames. Bristol Classics then agreed with Nikos that the car be transported to their workshop to get the car running. They spent many hours on it with various electrical and fueling issues. For instance, they found the ignition was permanently on (which they fixed), the fan switch had failed and the fuel was stale (tank drained, system flushed and fresh fuel added). On inspection of the carbs, the 40 webers are of two different types (one from a Lotus and one from an Alfa) with different jets etc. The carbs were dismantled and cleaned along with new jets etc so the car could run with reasonably balanced fueling. While the bill is a lot if money, the car was not in a road legal state (known to have no MOT and be a "barn find"). Bristol Classics have done a lot of work and shared photos and videos at most stages of the work. The sale agreement (who with, what was described etc) is really between the seller and the buyer. It's not something I could or would offer an opinion on in open forum as its not fair on either party without all of the facts. Even with the £1500 spent, the car us still thousands below the price of all other exportable age Westfields I have seen for sale. On a side note, I'd like to thank the people who have helped in the background (you know who you are!). One person in particular has spent hours and hours of his own time liaising with the docks, transport companies and the garage trying to help someone in need.

Test drive successful! All four wheels stayed on, car ran well and the brakes are a revelation! Need to get used to a higher, firmer pedal but it actually now stops how it always should have done 👍👍

I have altered the post with the invoice in it (blacked out two areas on the invoice) due to the fact it contained highly sensitive bank account details as well as an email address and phone number, which being in a public area could have caused major security issues for the poster.

Last piece of the jigsaw today. My spacers arrived in time to get the fitted while I had the wheels off. All done, car is back on four wheels! Rear arches filled much better now. I’ll take it for a quick test this lunchtime, and if it stops, and the rears don’t fall off, I’ll brave it to Cullompton for our meet tonight!! Perhaps not on the M5 though! 🤪🤪

@Stuart @Julie Hall - WSCC AO Representative @DomWash @Andy Westwood @Marcus Barlow - Show and Events Co-ordinator @aeg @Glynn Walters @ianali @Steve Bosworth @neptune @Dave Eastwood (Gadgetman) - Club Chairman @W Shep @Jim cunliffe @tex Event update: We have a 70 page draft roadbook ready 😎 The WSCC event team will be carrying out a ''dry run'' (hopefully 😆) over the next couple of weekends to make any tweaks required to the roadbook which will then be going for print. If all goes well the roadbook will be ready for distribution prior at Malvern kit car show, so @Marcus Barlow - Show and Events Co-ordinator can hopefully distribute to any club members at Malvern who are going on the tour, for the remainder of participants we can post out the roadbook to you so you have a chance to study it prior to the event weekend. Promotional clothing and stickers will be handed out at the start point on the day

And I don't driver her in the dark but I am impressed with the lights!

I blame @Crash test dummy. Just finished the painstakingly pain in the butt job and replaced the floor.

@Stuart @Steve Bosworth Gents thank you very much 😎 I will contact you both via a group pm after the dry run so I can share the up to date roadbook and the other route info I have and hopefully between us we can sort something out

I’ve been quiet on this thread for the last few months, mainly because there had been some suggestion that the regulations would change for this year so I waited for entries to open earlier this month before investing too much in the build. That don’t stop me drawing though and gathering a few of the parts need for the build. One part I did buy over winter was a body to make the sidecar. I’d looked at various things such as pedal bins and water butts but in the end I found an eBay seller local to me who made fibreglass tote Tot-Rod bodies. The cost wasn’t much more than a pedal bin would be and it would save me a lot of fabrication work. With that sorted I moved on to finalising the sidecar drawings, I’d initially looked to mount the pivot low to minimise tyre scrub but since the course is straight and the turns are minimal I instead settled on a high pivot as it would simplify the construction. The sidecar frame itself is quite crude but I wanted to keep the design of it simple and the weight down. Finally to get the BMX looking more like a motorcycle I modelled an engine. This will also double as a mount for the sidecar and also stop the crank arms from rotating. This week I stripped the BMX down and it got a rattle can finish in Red and Black while I wait for the laser cut parts to arrive so I can fabricate the sidecar. Finally my trusty companion Gromit who will be riding alongside me.

It sounds to me that Paul did a lot of work and lots of hours. I think the bill is probably spot on in that case. It can take a lot of time and effort to get non-runners going and from what I've read he's done a great job getting to the bottom of many issues. Never plain sailing with kits is it! Sorry about the sailing pun 😂

Thanks to Nick for the stickers and membership card, race ready for gurston this weekend

The plug in that drives this needs an update. Updates to plugins used to be done via the forum software’s own “marketplace” - but they recently ditched this and so you now have to do things differently. It is on the list of things to do.

@Stuart start point is Rushup Edge car park at the top of Winnats Pass near Castleton, I've amended first post. This is detailed in the road book nearest 24 hour petrol station for folks to fill up and have a toilet break before hand is Texaco Hope valley S33 0EB and there is also a Morrisons in Chapel-en-Le-Frith SK23 0HZ

I think as long as you good quality spacers they are both fine. I've had no issues at all with mine on the Jag.

Another form of tracked machinery.

Entries are open. An online entry list is not a necessity. Many events only provide an entry list when the Final instructions are issued.

Hello all. New member here having just joined and thought I'd introduce myself. I've just completed the purchase of my first Westfield from Andrew at Toybox, and the car is likely to be with me next week. Andrew has made the whole process so easy and relaxed. To say I'm excited is a massive understatement, and I'm sure you all remember that 'Christmas Eve' feeling very well. I've gone for an Electric Blue over black, FW, 2.0 Zetec on Omex TB's with Omex ECU too. Plenty of carbon goodies on this one as well. Looking forward to learning more, getting some experience under my belt, and essentially just having some fun! Steve.

Thanks for the insight. Always good to know it's come from a good home.

Welcome back, hope the refurb goes smoothly!

Oh shame, I was just about to message you! Fancied having a go around Curborough. maybe on the next one…

Evening guys I am based in Newcastle upon Tyne would it be possible tag on with you guys on the Sunday morning, and if so how would I go about doing this

Thanks for trying @TableLeg Anyone else have any suggestions?

MHR on your 60th @Onliest Smeg David aka “Mr Trousers” 😅

As Andy said, a brilliant day out, that is one good route up there on the tops of Buxton especially in this clear air. It is Drive it Day today so it was great to see so many unusual cars on the roads too. We met at Cupola The Westfield's started gathering All the other cars were blue today, even Billy's Porche is blue The motorbikes have now discovered this new venue Bonnet's soon came off as the advice flowed After breakfast (thank you for the black pudding ABC)we set off and had a great time on the twisties of Buxton before relaxing on the final mile or so behind the inevitable wobblebox to land at Quacker's cafe. In the car park at Quacker's were the Jaguar Club, making for a wonderful display. This car is a SS100, well, we don't think it is actually, we think it is made of fibreglass so it's definitely not a 1939 car. I was a interested in the name, the SS stands for Swallow Sidecar (SS Cars Ltd used to build sidecars) and 100 is the theorectical maximum speed. It was a beautiful looking car and I think it was probably brand new, it looked it. Lunch at Quackers Apology for the rubbish photo, someone forgot her camera so it was all done from my phone, the breakfast one in Cupola was even worse, grrrrr. Let us know how your daughter went on in the London Marathon @ianali and the other Ian @Ian Kinder (Bagpuss) - Joint Peak District AOon the parade in Windsor, how exciting. Thanks for coming everyone, hope you have enjoyed your cars as much as we have, see you next time xxx

Well Julie what a fabulous day driving around the Peaks we all had. Another beautiful route and fantastic weather. The sky was so blue and the sun was finally out and topped off with great company. Some great classic car out and about too. When we got to Quackers there was a Jaguar meet also.😎

Here for sale is my 2000 (W) Westfield Megabusa. I originally looked at moving the car on around this time last year but decided to keep it and fit a full windscreen instead. This was carried out through the guys down at the new Westfield factory (using all new parts at not insignificant expense), but I’ve found that I’m still not using the car as much as I’d like. I’ve just got to the point where I have to admit that the way I use a second car has now changed, and although I've loved it (a Megabusa was always the one for me!) and it's a lovely car, it just doesn't fit my lifestyle at the moment. The car has an interesting story as it was the press demonstrator for the factory during the year 2000, appearing on the “2 Wheels Better” program on Men and Motors, which included an interview with Chris Smith about the bike-engined revolution while he was sitting in the driver’s seat. This can still be seen on YouTube at the following link: https://www.youtube.com/watch?v=S_DaCqTgiPM&list=PLW4hczp_CZb4DI1EE5zRzFqEvDmBtbpmq&index=1 Around the same time it also appeared in Car magazine’s Performance Car of the Year test against a Caterham R500 and Lotus 340R. It can also be seen in various Kit Car magazines from back in the day, as well as the "Westfield Story" book, copies of which I have collected over the last few years and will be sold on with the car. As you can imagine from its press car status, it was very highly spec’d from the factory, with the specification briefly comprising: Image 13” 2-piece light alloy wheels. Westfield Dry Sump System. Westfield Reverse Gearbox. Quick Release Steering Wheel. Carbon Fibre Nose Cone. Carbon Fibre Cycle Wings. Carbon Fibre Dashboard. Carbon Fibre Centre Console. Carbon Fibre Tunnel Top. Carbon Effect Stoneguards. Willans 4-Point Harnesses. Nitron Shockers. Front and Rear Anti-roll Bars. After it’s time with Westfield, the car was bought by a collector and stayed with him for 18 years or so, having very little use within that period. It was then put up for auction and bought by Castle Cars in Cornwall who had been tasked by one of their customers to source the very best example of a bike-engined Westfield that they could get their hands on. They then went through the car, recommissioning it, before their customer found that at 6’ 4” and 18-19 stone, they couldn’t fit in it! It was at that point in 2019 that I bought it, travelling down to Cornwall from Merseyside with a trailer to pick it up one Saturday. It’s my 3rd bike-engined Westfield having built a Megablade during 2000 and subsequently keeping it for 11 years, before then building a Megabird after that. When built, the car was fitted with a brand new Hayabusa engine from a donor bike (as was Westfield’s way at the time) and has covered very little mileage since (less than 2,000), which is reflected in its condition, with only minor wear and tear to the bodywork and interior despite being almost 25 years old. The car has recently been serviced, with new oil and filter, spark plugs and a set of coils. Last year the shockers were serviced and dyno-tested by Nitron down at the factory, and the adjusters on the rear shockers were renewed. I have all invoices and details of all the maintenance carried out while in my possession, including the invoices from Westfield for the windscreen upgrade. We've had some adventures, and it will be missed, but time for somebody else to enjoy it now. £14,950 ono. I’ve added some walk around videos on YouTube, which can be found here: Please call or WhatsApp on 07394 113927, or message through here. I also have some spares such as an RAC Rollbar, new rear stoneguards (still in the package, never fitted), the original carbon fibre Westfield aeroscreen and mirrors, and a replacement sump panel for the dry sump system (picked up as it was the last one "old" Westfield had in stock, and I bought it just in case). These can be had through separate negotiation.