Jump to content
Store Testing In Progress ×

R7 WSC's Blog

A blog by Kit Car Electronics in General

  • entries
    5
  • comments
    34
  • views
    212,059

Carbon dash drilled and lacquered

Kit Car Electronics

Entry posted by Kit Car Electronics

25,131 views

 Share

I know how we all love a good dashboard post, so here's my contribution :d Spent an unbelievable number of hours in the planning and cutting, considering how few bits there are to it! No comments about sneezing with a mouthful of switches please...

Now I need to be patient and let the lacquer harden before I can polish it and fit the switches :down:

IMG_2174_zpsac7e680e.jpg

Well I wasn't very patient, so here it is with the switches and dials in place, plus the wireless steering wheel button project...

IMAG0016_zps206d1603.jpg

 Share

3 Comments

Recommended Comments

SootySport

SootySport 1,595

Posted

I am about to fit a carbon dash as well and wasn't aware it needs a lacquer coat, what did you use and how did you go about it?

Link to comment
Kit Car Electronics

Kit Car Electronics 2,310

Posted

Hi soot1e, you may not need a lacquer coat, depends on the surface finish you want- I had a few bubbles that wouldn't polish out easily, so rubbed down with 1200 wet and dry (wet) then gave 4 coats of halfords clear acrylic lacquer which can be flattened with 2000 grit and polished...

Link to comment
×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.