John Dolan - Wirral & North Wales AO Posted February 3, 2018 Share Posted February 3, 2018 Need the fitting that connects to the inlet on the fuel rail. Link to comment Share on other sites More sharing options...
groucher Posted February 9, 2018 Share Posted February 9, 2018 When I was building mine a few years back now, I found a small brass union that fitted perfectly, cant remember why I got it from, but it might have been a gas type fitting. Here in the picture. I then attached some fuel pipe to it, then into the rubber fuel hose. If I also remember there is an olive inside the connection to the fuel rail. hope this helps scott Link to comment Share on other sites More sharing options...
John Dolan - Wirral & North Wales AO Posted February 10, 2018 Author Share Posted February 10, 2018 That's a nice build, mine isn’t quite up to that standard. Thanks for the fuel fitting advice, didn’t know about the olive. John. Link to comment Share on other sites More sharing options...
Recommended Posts