aeg Posted January 3, 2018 Share Posted January 3, 2018 Hi, garage clear out time, set of front wishbones standard length black powder coated £100 RX8 gearbox conversion plate to zetec ?offers full hood and frame SEIW used (2 piece channel) £120 ITG air filter ( no back plate ) £30 Sold alloy airbox made to fit jenvey throttle bodies £100 MT75 gearbox ( had as a spare) £60 Based in Birmingham ,can post at cost for the smaller lighter stuff cheers Andy Link to comment Share on other sites More sharing options...
Liz03 Posted January 4, 2018 Share Posted January 4, 2018 Hi Andy we are interested in the air filter how long is it and how much posted to Peterborough. Thanks chris and liz Link to comment Share on other sites More sharing options...
aeg Posted January 4, 2018 Author Share Posted January 4, 2018 Hi Chris and Liz, the filter is 440mm long 150mm wide and 50mm deep i think its the standard size for twin carbs/throttle bodies, it doesn't weigh a lot so postage should be fairly cheap, cheers Andy Link to comment Share on other sites More sharing options...
Liz03 Posted January 4, 2018 Share Posted January 4, 2018 Ok I will have the filter thanks. Will you pm me the total cost and how you want paying. Thanks chris Link to comment Share on other sites More sharing options...
BenD Posted January 4, 2018 Share Posted January 4, 2018 @aeg what throttle bodies was the airbox spaced for Link to comment Share on other sites More sharing options...
aeg Posted January 4, 2018 Author Share Posted January 4, 2018 Hi bunje, the air box is spaced for jenvey bodies, there are trumpets welded on the inside that are threaded to bolt on to, cheers Andy Link to comment Share on other sites More sharing options...
TAFKARM Posted January 4, 2018 Share Posted January 4, 2018 Hi Andy, any pics of the wishbones? Link to comment Share on other sites More sharing options...
aeg Posted January 4, 2018 Author Share Posted January 4, 2018 Hi Russ, pics added of wishbones,cheers Andy Link to comment Share on other sites More sharing options...
turboturbo1980 Posted July 31, 2018 Share Posted July 31, 2018 Helo do you still have the airbox? Is it spaced for a Zetec? Measurement for cylinder 2 to 3 ? Best Regards Birger Schulz Link to comment Share on other sites More sharing options...
Recommended Posts