Jump to content
woodman

complete engine package

Recommended Posts

I am looking for a complete engine package for a very basic budget build.

ideally with exhaust manifold , inlet , ignition etc.

anything considered, - Bike or car engine

eg Crossflow, Zetec, K series, VX

Early Blade, R1

To suit a narrow chassis

Thanks

Stu

Share this post


Link to post
Share on other sites

@woodman 

I am hopefully swapping my pinto out over christmas. It will come out complete with twin 40s electronic ign , westfield alloy sump and bell housing, engine mounts, radiator, stainless steel exhaust system. 

 

Share this post


Link to post
Share on other sites
8 hours ago, woodman said:

Thanks for reply Neptune.

Do you have a price in mind please

Stu

Pm sent

Share this post


Link to post
Share on other sites

Complete package 270 bhp Vaux XE. dry sump, exhaust manifold and silencer, throttle bodies, engine loom, pressure reg, alternator, twin plate clutch, steel flywheel, steel crank. 9000 rpm

But if you need to ask how much I suspect it may be more than the amount you have in mind :)

 

A

  • Like 1

Share this post


Link to post
Share on other sites
On ‎04‎/‎12‎/‎2017 at 22:47, woodman said:

 for a very basic budget build.

 

 

1 hour ago, Arm said:

270 bhp Vaux XE. dry sump, exhaust manifold and silencer, throttle bodies, engine loom, pressure reg, alternator, twin plate clutch, steel flywheel, steel crank. 9000 rpm

 

 

 

 

Anchorman-well-that-escalated-quickly.jpg.b9a36b7528a40859dfb2e65f402aa33a.jpg

  • Like 2
  • Haha 1

Share this post


Link to post
Share on other sites

Probably not what your after but I have a 2012 ex John Trigger Racing Honda 1000rr Fireblade in the garage I could be tempted to sell.

Full race spec, ported head etc pretty much what Terry Everall is running at the moment.

Fitted with an AB Performance sump however it's a bare engine so you will need throttle bodies, loom, coil sticks air box and a stator, but all easily available from the bay of e or breakers.

£2200:00. 

 

 

Share this post


Link to post
Share on other sites

Thanks for offers Ash and Mark

Both excellant

But in this case, as RussH says, I am really looking for something more basic .

If the redtop was just a std engine....( just on carbs, etc)

if the blade was one of the older types ....( could do with all the bits tho)

Stu

Share this post


Link to post
Share on other sites

And I have a 1.8 Zetec with 2 litre cams on a Raceline sump, could come with twin 45 Webers or standard Ford Injection, alternator, all sensors, coil pack and Weber Alpha ECU and ignition system. Wouldn't have an exhaust manifold as I'm using that on a higher spec Zetec.

Would be £600 with Ford injection and standard flywheel, £1000 with the Webers or £1300 with a lightweight flywheel and paddle clutch as well.

Share this post


Link to post
Share on other sites

Thanks Derek

I have been offered a few Zetec packages ,

All good like yours

I will need to compere them as they are all different .

Whereabouts in country are you?

 

Share this post


Link to post
Share on other sites

Hi, I have a 1.6 CVH engine complete. Twin DCOE 40's, exhaust manifold etc just needs bolting onto a type 9 box. Was in my SE until July this year.

 

Share this post


Link to post
Share on other sites

Stuart.

Check eBay item 142597494552

Cheers 

John 

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×