Tim Reid Posted April 26, 2017 Share Posted April 26, 2017 What I have is a late CVH EFI flywheel. They are just over 6 kg and have marks for crank sensor. Bolt pattern is the same as 1800/2000 zetec all you need to do is drill out to 11mm. You can use a 1.6/1.8 early mondeo clutch that will have the same splines as a type 9 Or have it drilled to take a pinto clutch. Ring gear is the same so re use starter. A number of people on here have used them as have a number of other cars which use the zetec engine so they are getting rare now (the EFI ones). I'm looking for £75. I'm at Stoneleigh on Sunday. 1 Link to comment Share on other sites More sharing options...
Tim Reid Posted May 4, 2017 Author Share Posted May 4, 2017 I will post for free if anyone is interested? Link to comment Share on other sites More sharing options...
Tim Reid Posted May 12, 2017 Author Share Posted May 12, 2017 Bump, also on locost builders now I have hit the 10 post target. Link to comment Share on other sites More sharing options...
dhutch Posted June 5, 2017 Share Posted June 5, 2017 I have one, but must be of use to someone! Link to comment Share on other sites More sharing options...
martin123 Posted June 7, 2017 Share Posted June 7, 2017 PM'd Link to comment Share on other sites More sharing options...
Recommended Posts