Jump to content

Herts, Beds & Bucks Area Meeting, 14 Jan 2015


Matt Hillam (Fatbloke) - Herts Beds & Bucks AO

Recommended Posts

Herts, Beds & Bucks Area Meeting


 


2nd Thursday of the month, 14 Jan 2015


 


Grove Lock


http://grovelock.co.uk/find-us


 


7pm onwards


Everyone welcome.


 


Who can make it this month?


Link to comment
Share on other sites

Have to go into London on Thursday afternoon but will endeavour to get to the meet.

 

I'm hoping to recruit one or two interested volunteers (as in unpaid) to help make a foam seat :)

Link to comment
Share on other sites

Have to go into London on Thursday afternoon but will endeavour to get to the meet.

I'm hoping to recruit one or two interested volunteers (as in unpaid) to help make a foam seat :)

Are we going to make it at the pub Gezza ?

  • Like 1
Link to comment
Share on other sites

Should be there

 

no desert this month ;-)

 

You've already made your seat then David  :cry:  :cry:  :cry:

Link to comment
Share on other sites

Are we going to make it at the pub Gezza ?

 

Too many double entendres for my liking in this section of the club.

 

No, 'we' are not going to 'make it' at the pub, or anywhere else Martin.

 

I was hoping for sufficiently interested party/ies to assist with the fabrication of something to stick my bum in. :)

 

Anyway, I think I have it sussed now and will probably just get on with it. I reckon it'll be a piece of cake. Sponge cake of course :)

 

If I don't get to the Feb meet, I'll be encapsulated in foam, entombed in a Westfield cockpit.

  • Like 2
Link to comment
Share on other sites

As Gerry enquired about expanding foam seats earlier, I guess someone had to post this...

 

A friend of mine once built a canoe. He spent a long time on it and it was a work of art.
Almost the final phase was to fill both ends with polyurethane expanding foam.
He duly ordered the bits over the internet which duly arrived in two packs covered with appropriately dire warnings about expansion ratios and some very good notes on how to use it.
Unfortunately he had a degree, worse still two of them. One was in Chemistry, so the instructions got thrown away and the other in something mathematical because in a few minutes he was merrily calculating the volume of his craft to many decimal places and the guidelines got binned as well.
He propped the canoe up on one end, got a huge tin, carefully measured the calculated amounts of glop, mixed them and quickly poured the mixture in the end of the canoe (The two pack expands very rapidly).
I arrived as he was completing this and I looked in to see the end chamber over half full of something Cawdors Witches would have been proud of. Two thing occurred to me, one was the label which said in big letters: "Caution - expansion ration 50:1" (or something similar) and the other that the now empty tins said "approximately enough for 20 small craft"
Any comment was drowned out by a sea of yellow brown foam suddenly pouring out of the middle of the canoe and the end of the canoe bursting open. My friend screamed and leapt at his pride and joy which was knocked to the ground as he started trying to bale handfuls of this stuff out with his hands.
Knocking the craft over allowed the still liquid and not yet fully expanded foam to flow to the other end of the canoe where it expanded and shattered that end as well.
A few seconds later and we had a canoe with two exploded ends, a mountain of solid foam about 4ft high growing out of the middle, and a chemist firmly embedded up to his armpits in it.
At this stage he discovered the reaction was exothermic and his hands and arms were getting very hot indeed. Running about in small circles in a confined space while glued to the remains of a fairly large canoe proved ineffective so he resorted to screaming a bit instead.
Fortunately a Kukri was to hand so I attacked the foam around his hands with some enthusiasm. The process was hindered by the noise he was making and the fact he was trying to escape while still attached to the canoe.
Eventually I managed to hack out a lump of foam still including most of his arms and hands. Unfortunately my tears of laughter were not helping as they accelerated the foam setting.
Seeking medical help was obviously out of the question, the embarrassment of having to explain his occupation (Chief Research Chemist at a major petrochemical organisation) would simply never have been lived down. Several hours and much acrimony later we had removed sufficient foam (and much hair) to allow him to move again. However he still looked something like a failed audition for Quasimodo with red burns on his arms and expanded blobs of foam sticking everywhere. My comment that the scalding simple made the hairs the foam was sticking to come out easier was not met with the enthusiasm I felt it deserved.
I forgot to add that in retrospect rather unwisely he had set out to do this deed in the hallway of his house (the only place he later explained with sufficient headroom for the canoe - achieved by poking it up the stairwell.
Having extricated him we now were faced with the problem of a canoe construction kit embedded in a still gurgling block of foam which was now irrevocably bonded to the hall and stairs carpet as well as several banister rails and quite a lot of wallpaper.
At this point his wife and her mother came back from shopping......
Oh yes - and he had been wearing the pullover Mum in law had knitted him for his birthday the week before.

  • Like 2
Link to comment
Share on other sites

Sounds like Matt has the experience needed to 'help' Gerry with his seat ;-)

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.