CRAIGR Posted September 30, 2016 Share Posted September 30, 2016 Type 9 to Sierra diff prop wanted . Changing from mt75 to type 9 Please pm me Link to comment Share on other sites More sharing options...
DamperMan Posted September 30, 2016 Share Posted September 30, 2016 I think they come in different lengths based on engine to!.. 1 Link to comment Share on other sites More sharing options...
CRAIGR Posted September 30, 2016 Author Share Posted September 30, 2016 Good point .Would have thought the g/box would remain in the same place despite engine . Engine is 2ltr zetec. Link to comment Share on other sites More sharing options...
DamperMan Posted October 1, 2016 Share Posted October 1, 2016 I can't be sertain and only have my own experience. My car came with a cvh and v8 bonnet. I fitted the zetec and it sits in the same spot. Every other zetec I've seen is much further back. with a cut out of the bell housing to get it further up the tunnel. Mine is in without a cut out of the tunnel and right at the front cam cover level with the front of bonnet. My prop at the time was a badly made home made one I assumed to be to long. I bought a unused prop from off here which was type 9 to Sierra diff.. It was the same length. So I assume there must me different lengths or my cars to short. Gearbox to long! Link to comment Share on other sites More sharing options...
CRAIGR Posted October 1, 2016 Author Share Posted October 1, 2016 Bttt Link to comment Share on other sites More sharing options...
Recommended Posts