matt_c Posted April 24, 2016 Share Posted April 24, 2016 SOLD! I have a pair of lower front wishbones that are surplus to requirements. They've never been fitted but the powder coating is flaking a little in some areas, as did a lot of the powder coating on my parts from Westfield. They have the rubber bushes pressed in already. I am 99% sure they are for the standard WSC uprights and are standard track. Let me know if you want any measurements taking though. I'm looking for about £95.00 for the pair and I'll post them for £5.00 to a mainland UK address or you can collect for free from Melksham, Wiltshire. I have some photos on my phone that I can email if you want to see them but they look exactly how you'd expect them to look. Failing that I'll post some on here when I get the chance. Thanks for looking Matt Link to comment Share on other sites More sharing options...
westy 1 Posted April 24, 2016 Share Posted April 24, 2016 may be interested are you going to stonleigh Link to comment Share on other sites More sharing options...
matt_c Posted April 25, 2016 Author Share Posted April 25, 2016 may be interested are you going to stonleigh Sorry but I wont be going. I can dispatch them or maybe drop them off with somebody local to me (Melksham/Swindon, Wiltshire) if they were able to take them to Stoneleigh for you. Link to comment Share on other sites More sharing options...
westy 1 Posted April 25, 2016 Share Posted April 25, 2016 just had a look at mine and i have 4 bolts holding the lower ball joints on so think they are different i think my car uses cortina ball joints Link to comment Share on other sites More sharing options...
matt_c Posted April 25, 2016 Author Share Posted April 25, 2016 just had a look at mine and i have 4 bolts holding the lower ball joints on so think they are different i think my car uses cortina ball joints Ah, OK, no worries. I'm 99% sure it's these ones http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=125 Link to comment Share on other sites More sharing options...
Kingster Posted April 26, 2016 Share Posted April 26, 2016 just had a look at mine and i have 4 bolts holding the lower ball joints on so think they are different i think my car uses cortina ball joints I'm not 100% sure, so maybe a call to factory will confirm, but can't you use maxi ball joints (that fit these) with cortina uprights? I'd assume alloy uprights copy the cortina geometry so can't see why not. 1 Link to comment Share on other sites More sharing options...
matt_c Posted April 29, 2016 Author Share Posted April 29, 2016 Anybody? before I stick them on eBay. Link to comment Share on other sites More sharing options...
matt_c Posted May 4, 2016 Author Share Posted May 4, 2016 Sold Link to comment Share on other sites More sharing options...
Recommended Posts