jc249u Posted March 29, 2015 Share Posted March 29, 2015 Hi I am looking for a whole load of bits for my mazda based westfield. Here is a little list of a few of the bits I'm on the hunt for1) fuel tank2) headlamps3) front stalk indicators4) GRP dash5) 2 kick strips6) 2 fan mounts7) zetec steering column shaft bonnet fastners and locatorsThanks for looking Cheers jon Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted March 29, 2015 Share Posted March 29, 2015 H Jon, I'm afraid I can't help with any of the parts But to let you know that if these are need for a Mazda SDV build then the zetec steering column wont fit. The Mazda SDV uses a combination of the unmodified mazda upper steering column and a modfifed madza lower steering column. The stub connection to the steering rack is a westfield part that is more commonly found on their 3-piece steering columns. Link to comment Share on other sites More sharing options...
jc249u Posted March 29, 2015 Author Share Posted March 29, 2015 Hi Mark Thanks for letting me know. I've cut the bracket off the upper steering column and had the lower steering column modified by westfield. Can I only get the third part of the steering column from westfield as I was hoping to find it was a standard part? Cheers Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted March 29, 2015 Share Posted March 29, 2015 Can I only get the third part of the steering column from westfield as I was hoping to find it was a standard part?The third section of the steering column that connects between the centre column and the steering rack is a Westfield part. It was used on their cars that had 3-piece steering columns although I believe there might also be a couple of different lengths for it depending on the model it was fitted to. Link to comment Share on other sites More sharing options...
Recommended Posts