clive_r Posted February 24, 2015 Share Posted February 24, 2015 Help please - can anyone provide the outside dimension (diameter) of the westfield metalistic bushes. I've just purchased rally design upper wide track wishbones (with in situ camber adjustment) to go with my old original westfield lower wide track wishbones. I'm perfectly happy with the metalistic bushes but are unsure if new ones supplied by westfield will fit the rally design upper wishbone. Thanks. Quote Link to comment Share on other sites More sharing options...
Mark (smokey mow) Posted February 24, 2015 Share Posted February 24, 2015 0.94" OD x 1.5" long Quote Link to comment Share on other sites More sharing options...
clive_r Posted February 25, 2015 Author Share Posted February 25, 2015 Thanks Mark, Surprised if no one else has has issues here; Westfield metalistic bush = 0.94'' = 23.88mm Rally Design wishbone = 23.2mm (approx using digital vernier) Therefore Westfield bush is never in a million years being pressed into place Guess I'm placing an order for Rally Design polybushes then - but are they not sold for both Westfield & their own wishbones - that's some tolerance! Quote Link to comment Share on other sites More sharing options...
XTR2Turbo Posted February 25, 2015 Share Posted February 25, 2015 Have you cleaned off the powder coat? Quote Link to comment Share on other sites More sharing options...
clive_r Posted February 25, 2015 Author Share Posted February 25, 2015 Hi XR2Turbo There's no powder coating on the inside of the tube/bore. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.