Aerodynamix Ltd Posted September 22, 2014 Share Posted September 22, 2014 For sale , new prices are as follows , my price at the bottom : Pair of JK Seats , usual lovely quality . £240.00 + These are without moulded bases which cost from £50.00 extra each . BUT come with 5 piece padded upholstery £140.00 + AND come with Carbon tops £100.00 + So total for a pair of new ones I make it = £480.00 I'm looking for £300.00 Only downside is one rear support bracket is missing but would be easy to make one up or get another off JK to match . I will post photo's tomorrow of seats and brackets , these have come from a well known committee members car and have been looked after really well . I'm not keen on posting , I am going to the Factory on Friday and will also be going to the Speed Series Awards evening if that helps , a mate of mine also works up Yorkshire way sometimes . Link to comment Share on other sites More sharing options...
wackydo Posted September 22, 2014 Share Posted September 22, 2014 Hi Julian, I'm very interested in these. Do you know which size these are? They do a couple of widths I think. This is their sizings page here. http://www.jkcomposites.com/7s-page.html Tony Link to comment Share on other sites More sharing options...
mikele Posted September 22, 2014 Share Posted September 22, 2014 Also interested if Tony doesn't have them off you. As long as they fit a narrow? Can collect if needed. Cheers Mike Link to comment Share on other sites More sharing options...
Aerodynamix Ltd Posted September 22, 2014 Author Share Posted September 22, 2014 I was going to post sizes with pictures but sizes are here , pictures tonight are too poor so will post tidy ones tomorrow . Seat 1 is a 4246 which fits an MT75 tunnel drivers side very nicely Seat 2 is a 3946 which fits an MT75 tunnel passenger side very nicely MT75 tunnel cars are slightly wider on the drivers side so these seats fill maximum widths available without having to wedge them in . I've had a couple of people sit in the drivers seat and is wide enough to comfortably fit the more well built of us . Sorry these won't fit a Narrow Mike although if you look at this link these should just fit : http://www.aerodynamix.co.uk/grp-seat.html Link to comment Share on other sites More sharing options...
wackydo Posted September 22, 2014 Share Posted September 22, 2014 Julian, Mine's a seiw with a T9 box, will they fit just as well as for the mt75? Link to comment Share on other sites More sharing options...
Aerodynamix Ltd Posted September 22, 2014 Author Share Posted September 22, 2014 Tony , Just give the tunnel a measure , I assume that the tunnel on yours will probably be the same if not narrower , certainly the MT75 is a lot wider at the front not sure further back . Sizes are on your link of course where i got the part numbers . You're more than welcome to come and have a look at them , or if you are about Thursday night come along to the Cotswolds meet and I will bring them along with me and it's the right side of the river as well then . Link to comment Share on other sites More sharing options...
wackydo Posted September 23, 2014 Share Posted September 23, 2014 Julian, I'll measure this evening when I get home from work. Thursday evening might well be good for me. cheers Link to comment Share on other sites More sharing options...
Aerodynamix Ltd Posted September 23, 2014 Author Share Posted September 23, 2014 Provisionally sold , first dibs to Tony , 2nd dibs to phonecall - still waiting on your email . Link to comment Share on other sites More sharing options...
Recommended Posts