the stoat Posted September 21, 2014 Share Posted September 21, 2014 C20XE block with the early timing belt setup. Standard bore size required. Thanks, Stuart. Link to comment Share on other sites More sharing options...
Crash test dummy Posted September 21, 2014 Share Posted September 21, 2014 All blocks will take either type of belt set up. The later blocks are generally considered to be stronger but I've never been able to tell the difference TBH. Good luck with finding a good standard bore . Link to comment Share on other sites More sharing options...
the stoat Posted September 22, 2014 Author Share Posted September 22, 2014 That is great news as I have a later block in the garage, but had been informed that I could not use my early belt and pulley set up. I hope it is the standard bore as my pistons are 86.5 so only scope for one rebore without new pistons. Link to comment Share on other sites More sharing options...
FILFAN Posted September 22, 2014 Share Posted September 22, 2014 Yeah all you need to do is undo the dreaded e20 crank bolt and swap the bits over. Link to comment Share on other sites More sharing options...
Recommended Posts