Jump to content

Westfield 1.6 race car *Full rebuild with Honda K20*


DannyScarbro

Recommended Posts

Good evening gents,

I thought it was time I introduced myself, latest few cars and most importantly my first Westfield.

The background, Big petrol head. Old cars>new cars.

Started life driving classic mini's with my dad having 30+ years building a series race engines. None of them were standard! Moving onto Honda crx's offering a reliable and better performance. 5 crx's later I had an itch for trying a rwd car, so the mx5 was chosen. The first of which was a 1600 with a welded diff(interesting) and the second a supercharged variant. Both great cars but after seeing my friends westfield and having to wind the supercharged mx5 to within an inch of its life (literally) I decided I needed one.

My choice, a Mk indy with a nice Duratec engine, many modifications and a few track days later I decided i wanted to go into a Westfield.

So I purchased Mark Lammond's1.6 sigma engined race car. And what a great car it is.

I will upload the small project thread and updates below copied from a different forum.

Hope you like it and look forward to getting on track with some other forum users.

Dan

Link to comment
Share on other sites

A few of you may have been following either Matts great Mx5 track car or my Mk 7 kit car thread, well we now have another to play with!

It will be the replacement of the Mk but will swap the best bits of each to start with!

It's a full on race car with quite a proven record, championship wins so if it's not quick on track we know it's me!!

Here's a picture and the spec;

Westfield Sei Widebody

1.6 Sigma engine

Fully forged

SS5 race cams

Jenvey throttle bodies

Omex 600ecu

Formula ford 3 stage dry sump

Laminova water oil cooler

AP Suretrac LSD

Bara 4.4 CWP

Caterham 6 speed box

202bhp @ 8,100 rolling road tune

Aluminium Hubs

New Sierra calipers

Drilled grooves disks all round

Caged full race cage

Full flat bottom floor

Racetechnology dash 2

There is probably more, just can't wait to take it out now.

2abfc644-7782-4228-a45c-90bb5ecb8d02_zps

First job was to put it onto smaller wheels, I've always been a believer than smaller wheels make the cars feel a bit more 'on their toes' helps with gearing and has a better variety of tyres for a reasonable price.

I had a spare set of team dynamics pro race so I up these straight on. Cleaned the car and took a few pictures of my new purchase.

6972783F-DCD4-409E-9111-B61E317AFBE2_zps

937C054E-691C-49F5-96EA-26711A1BE29C_zps

45F7AFBE-2AC5-4613-A20A-FB3FC35FB226_zps

24A7D69C-0175-43C5-AD25-D98F0C90903C_zps

D5A36702-CE76-4EDB-97F4-DC4F9E95CEEC_zps

61CD8C4B-7E61-44EB-AB9B-02EBBED9DB51_zps

Dan

Link to comment
Share on other sites

So after a few months of ownership I still have not driven the westfield. I in fact have done the opposite and locked it away in my partners garage so I can't tinker with it.

Your probably thinking I'm mad but I did not want to start playing with it until it's predecessor finished and sold.

I have now got the Mk finished and some coming to view it this week so fingers crossed May get it insured next week.

I did however get to have my first days work on it, first job was to replace the tatty looking seats with some more appropriate and focused ones.

Current seats;

3B435C48-F77A-4DDC-9BBE-05BAC7AAD966_zps

74CDF29A-757B-4CFA-9C4B-67F528F4E06C_zps

And the replacements;

A7086062-AAC1-4ACD-A745-8890B830066A_zps

B1A6506A-CA9C-4B41-86ED-BD48F0694D9C_zps

Next was the job of a) removing the race car stickers and b) restoring the paintwork.

Numerous of hours with a few pairs of hands and old debit cards later the stickers were removed. Leaving luckily not too much sticky residue.

My friend who is quite keen on cleaning cars had some citrus tar and glue remover which accompanied with some elbow grease sorted the job.

Next job was to give the dull paintwork some shine, que the orbiter and some wax.

I was really pleased with the results and think the car looks a million times better.

Before;

718f8ce8-19f0-4c95-a0a3-e23215267aa8_zps

a8eebdf4-b11f-435f-9c37-e4fb07f601ad_zps

After;

3DA27BA4-A039-4315-8A64-3C5E115E14BA_zps

67752439-BCDC-43E6-9DC5-97C682AA40DE_zps

DC3B50DD-71A6-45CB-B1E9-D719A63CDF83_zps

7566F749-57BF-473D-9E32-E95107A953C9_zps

http://i1321.photobucket.com/albums/u542/dannyscarbro/0eb09e47-a721-46c3-95d4-86a20faf21b7_zpsa796f8f7.jpg

http://i1321.photobucket.com/albums/u542/dannyscarbro/C012BF5B-ED31-4F50-A16C-F5A607C14538_zps3xqxykdy.jpg

Hopefully the next update will be one with an mot and some driving experience!

Dan

Link to comment
Share on other sites

Finally got a chance to get this mot'd/taxed and take it our for it's first drive.

First impressions are I love the engine, revs so eagerly but yet pulls strongly from 4.5-5k all the way to the limiter.

Idle is a little lumpy and it's abit of a dog around town but nothing like the old mini's used to be so no issues there.

The gear ratios are dare I say it perfect! The pickup is breathtaking dropping it back just over 6k when changing at the 8kish.

First impressions on the chassis are also good ones, very stable and direct with next to no tramlining or struggle for traction.

Brakes feel solid and have a nice pedal feel, clutch is Rudy hard but I'll get used to it.

Only niggle so far is it's far too low, scrapping on pretty much everything and the gearbox takes some work on the down changes. Rev matching is a must.

Next few developments;

New shocks/springs to raise the ride height and allow for the suspension to have some travel (currently v short and hard springs)

Anti Roll bars to aid with the rigidity with the softer springs

Re-worked air induction to try and get more/colder air

Then it will be a trip to blink Motorsport for a geomtary set-up and dyno.

First track outing should be touch wood at cadwell on Saturday with the time attack boys.

Got some late nights booked in the garage doing a home made geo/corner weighting set up. Could go well, could not!

Picture from the test station;

2FECFB70-CE49-430B-BF7C-1F52F18FEB72_zps

And got a chance to have a look at and get a quick picture of the flat floor;

BDC4B2E0-D0B3-4142-AFCB-A77CFF4CCE8E_zps

Dan

Link to comment
Share on other sites

Got a chance to have a full day on the westfield last week, got a few parts from the close ones for my birthday so had to get them attached!

BE32CE02-D9A4-4FAB-8AC6-00BB93FD0338_zps

FC5AD18D-9816-4355-B108-3B24C6CEF2D9_zps

First of the jobs was the front lights, the current ones are/were chrome with as much power as scented candle. Que a new set of 'dominator' headlights in black and a set of super bright bulbs.

Before;

C1AA6B91-FA42-440B-AD6A-116A1FCD43D7_zps

A70B7F5C-5DC0-4DB7-9D0F-1C1089AA21FE_zps

One of each;

411C7D26-76A8-4949-A867-AA57F48D65CA_zps

CCF6BBC0-A39C-496D-BF0C-33AADE8DAFED_zps

After;

AC4CE5E8-9A51-4F11-8DB0-9DB7438C42D5_zps

AF506765-64CC-4D4D-80BB-A78CD8D1B29A_zps

A quick and small change was the steering wheel, the current wheel was a 305mm racetech, which although nice I prefer a little smaller on a kitcar, the replacement was a 270mm SPA, well priced and feels nice.

D5A36702-CE76-4EDB-97F4-DC4F9E95CEEC_zps

E651109B-D6D5-4327-82A5-B95D092B8A93_zps

Dan

Link to comment
Share on other sites

The next mini project was re-vamping the current induction set up, currently supporting broken trumpets and old battered k&n filters, the plan was to get some slightly longer trumpets to maximise the midrange whilst spacing the air box out from inside the bonnet to into the free flowing air, thus more and colder.

Before;

4B876307-64B7-447C-BF0B-85DA285DBCCF_zps

3AD04C91-A7E3-4CC5-B164-E67E2F30B031_zps

9A75F9BA-DC74-4900-AC66-EE93FCA6978F_zps

First job was measuring up and making a template for the bodies, so an old box, a screwdriver and a marker pen sorted the job...

83921F89-0D5A-4FF2-BDBA-2782E783AE0A_zps

04D712BE-ECEE-4971-A089-7E837F54AABD_zps

27ED63C4-18B5-4532-B358-B7808DAEF54C_zps

I then went onto marking a drilling the carbon airbox...

D50D9192-A230-486B-948F-F241361308DA_zps

And trial fitting with the new trumpets....

E8E6A0D0-B277-4B51-9E5C-78F762B1FA34_zps

57696024-BFDA-48ED-932D-DB4847375155_zps

Everything all sorted so tightened up with some loctite just Incase.

The air filter then needed some minor modifications and it was on...

6E4D1CDF-9CC8-45C6-A1FF-284B44847D44_zps

Dan

Link to comment
Share on other sites

Looks awesome Dan, I saw that car for sale, it looked a bargain and your elbow grease has made it look brilliant! Oh and welcome to the club :)

Link to comment
Share on other sites

Then just a case of enlarging the whole in the bonnet for the larger filter and were all done..

BC8BEC5E-9AE1-4E25-BF72-385B5445DD0D_zps

The result, it sounds better, gives a lovely snarl and snort from about 4-6 and then so nice crisp sharp sound all the way round. It does feel a bit sharper but that could just be the added sound portraying that.

Oh and it looks better;

CD79A615-B90F-4047-A436-652791DA881E_zps

And the final changes was the suspension, although it feels good with the current set up, it was all built around been used with 15" wheels, my plans un-fortunately only revolve around 13" wheels.

Personal preference but it makes the cars feel more 'on their toes' which shorter gearing and a better/cheaper tyre choice.

Problem I had was the shocks were at full open length and it's still far too low, Que. a new set of shocks. I went for the pro-tech shocks as I have used them before and found them to be very good.

4BC47EAD-8229-4B01-B88F-4584427C0788_zps

All fitted and allowing a lot more sensible ride height.

4354041F-9A52-4781-8CCD-E9E133769979_zps

And a few quick pictures;

D612271A-CB78-4B08-BDDC-3FFB64DFEB30_zps

B087CC52-2C00-41EF-A8CB-E4784C854BBF_zps

D485DB5A-3955-4DD5-8821-D8DB08645E8B_zps

Dan

Link to comment
Share on other sites

  • 1 month later...

Thanks for the kind words chaps.

 

 

Having owned the car for 6months now, and loving every mintue of it its time for a change!!

 

Between me and my brother we are going to be building an mx5 race car and trying to do the occasional race day over the next few years so I want to make some changes in getting this car to a nice reliable package, so I can just jump in it at any time and drive it on the road or track with no worries.

 

 

It hasnt missed a beat at all, however with any highly strung engine I know it will need re-building more often, and around town driving is doing the clutch no favours!

 

So what do I do/change?!

 

I think the power and delivery is great of this engine and dont want to lose the high revving 'fun' aspect of the ca; Ive had a duratec engined kit car before and allthough the engine was fantastic I almost found it abit bland.

 

We have got a track mx5 with a f20 Honda engine fitted, which is totally standard bar a massively impressive tune from the blink motorsport chaps. Its a barrell of laughs and the engine works beatifully....can you see where this is going!

 

I've decided on using a K20 Honda engine, cheap to buy, plenty of them available, lovely free revving engine and bags of potential for the future if and when! I appretiate the F20 is probably and easier conversion and has a forged bottom end as standard, but they dont have the i-vtec and cost 2.5 times as much!

 

 

I have been speaking with Mcgregor Motorsport who can provide a bell housing adapter so I can mate the engine to my straight cut quaife box. Then I shall run the engine totally standard bar breathing mods to ensure reliability.

 

If im honest I dont need and think any more power than 200-210 for the tracks I will be using, and need to upgrade the squidgy bit driving it brefore then!!

 

 

 

It seems the chain and tensioner is a good part to replace on the engines so I will be doing this before fitment, as well and fitting a fully baffled sump.

 

 

Has anyone else on the forum used the K20 engine?

 

Would be interested to see and hear the inevitable problems we will come across before bumping into them!

 

Many thanks

 

Dan

Link to comment
Share on other sites

Does anyone have an email or phone number for Dan? Need to contact him urgently this weekend.

Thanks in advance.

H.

Link to comment
Share on other sites

  • 11 months later...

A well overdue update! Copied from another forum so please excuse if all does nit read correctly.

Managed to get a morning on the Westfield today, plan is to completely strip the bodywork to make the engine swap as easy as possible.

Tidying the car up as I go, then re spraying or wrapping the bodywork before putting it back together.

I'm thinking Porsche Rivera Blue.

Some progress shots;

C6CF3AA3-252B-46D3-A142-4DE84643C534_zps

17633BB1-2B51-4671-A74B-B771FB6F9E19_zps

ba4305b9-eaf5-4c3e-a864-80c49dca6921_zps

317D8553-B8CC-4D71-BAA2-676245CD17C3_zps

2a2202d9-a8a1-49a7-8878-4397626179c5_zps

C02AF1AB-BCA3-45F0-B887-BBCF149D678E_zps

EC702276-389C-47F8-91D0-A0CB3752CF0B_zps

B8335BC0-B3FF-4914-84EC-6DF7DD60E50F_zps

[url=http://s1321.photobucket.com/user/dannyscarbro/media/19938F9B-1117-4681-AF74-05CF71DBA1CC_zpser6xw1jo.jpg.html]19938F9B-1117-4681-AF74-05CF71DBA1CC_zps[/

I have 9 days holiday to take so hoping to have a week making done good progress fairly soon.

Anyone have any feedback on wrapping?

Dan

Link to comment
Share on other sites

Thanks for the kind words Tim, thankfully it's only the car :)

And for the next phase of the journey...

'what lies beneath'

Got my holiday booked, 2 weeks to get cracking on the westfield, get the old engine and box out and get fabricating the new one into place, however there has been a spanner in the works...

On its way for engine removal getting a luxury ride in the shuttle..

41F47FAF-0326-411F-852E-DF255AC46AC3_zps

On removal of the engine it reveals we have some more pressing issues....

The car has been involved it quite a big front end accident and the repair that was done is not great.

Thankfully we decided to remove the engine and got the opportunity to catch it before it let go and could have killed or seriously injured someone.

All the welds are very poor and the results speak for themselves, the alignment of the joins are all not straight and question how the heck the car handled so well!

Front wishbone mount - drivers

23EDEF80-FBD2-49E4-A6C1-DBD2D4B980FC_zps

Front wishbone mount - passenger

D5B7817F-CB5D-4CA1-A6CD-0423F39834C9_zps

Other pictures;

CD312075-8F8A-4ABE-9F7A-03E89FC0CB1E_zps

B5C4AE20-64F4-4454-BC74-F6778810E407_zps

8B7943F8-670F-4CF8-B4F1-0D1F97C371C9_zps

ACC6B726-A122-4E81-8C8C-CF2031529610_zps

So what's the plan,

Get a new chassis ordered from Westfield.

Build the car up using the good parts and with the K20 from the word go.

I understand that this is going to take a fair bit of time and work but at least then it will be perfect and most importantly we will know things are done correctly.

First job then, make the garage a spacious, clean, light, warm environment to do the work in.

It's current state of affairs is some what cold, dark and a mess...

FAD41E6D-758F-4F69-A85E-1879274C11B3_zps

C3D09FF2-CA4D-406F-9B98-011E66AA2A69_zps

93BC1751-5FC2-4180-A303-6404E2755ADC_zps

Dan

Link to comment
Share on other sites

Have spoken with the previous seller who is a genuine guy, raced the car for a year after doing the repairs and thought it was fine. Not a welder by trade but he is been very amicable and we will get something sorted.

In other news with the funds from selling the engine and gearbox I have purchased the following from Westfield;

Full starter kit compromising off;

SpaceFrame Chassis

Top front wishbones

Bottom front wishbones

Pedal box inc master cylinder

Brake lines aeroquip and tee piece

Aluminium panel set (floor plan, seat back, tunnel and scuttle)

Wing Brackets

Rear caliper uprights

Westfield bar shaft

Hubs with studs

Handbrake cable

Top rear wishbones

Bottom rear wishbones

Top steering column and lock 4x spherical joints

Body kit (rear body tub, scuttle, bonnet, nose, screen fillet, wings, boot box, badges

With time been of the essence I chose to have the following bits done at the factory;

Fit and sealing of aluminium panels

Fitting of brake lines and fuel lines

Supply and fitting of full wiring loom

Rivnuts fitting to the chassis

And the following upgrades;

Powder coating of chassis and suspension parts

Wide track front wishbone upgrade

Exterior aluminium panel set

V8/mega s2000 bonnet

After a lot of deliberation we have chosen White for the body panels.

Now a long 8 week wait, starting to get excited.

Dan

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.