Jump to content

Workshop Clearout Seats, Carbon Wings, QR Steering Column.


Charles King

Recommended Posts

Hi everyone,
Having a bit of a workshop clean up, what started as a pair of seats is now turning into a full blown clear up!

Pair of Cobra Roadster 7 Seats

One in very good condition, other I still need to drag down off the top shelf in the garage, seem to remember it had a few small holes at the base (will confirm this evening). Black, with yellow 'Cobra'. With harness holes, and seat runners.

Seat 1: excellent condition, could do with a clean but that is all. Photos:
th_IMG_0527_zpsc1ce5d55.jpgth_IMG_0526_zps08217c07.jpgth_IMG_0524_zps8c1c2758.jpg

Seat 2: ok condition, small paint mark on front of the seat pad, tear on the RHS side support, small holes on the LHS Seat pad side. Photos:
th_IMG_0529_zpsbabad7f3.jpgth_IMG_0535_zps779d874e.jpgth_IMG_0533_zps5d4fafac.jpgth_IMG_0532_zps064581bd.jpgth_IMG_0531_zpsfe10d2e6.jpg

As one is a bit damaged I've reduced the price to £130 for the pair, which is still far cheaper than buying just one!

Quick Release Steering Column

Spa quick release steering boss welded to a steering column, complete with a 3 hole to 6 hole (OMP, Sparco, Momo, etc) steering wheel adapter & OMP horn button.

Total length (incl boss): 77cm
Keyway: starts at 18.5cm from wheel face, ends at 23cm.
Bottom splines: 14.25 x 36 (Sounds mk1 escort).

Photos:
th_IMG_0523_zps02acf9fd.jpgth_IMG_0522_zpsb9c38763.jpg

Price £30.

Collection from Rye in East Sussex.
Payment: via cash on collection.
Swaps or Part Ex: yes after harnesses (4 point with aero buckle, bolt in lower mounts, ideally in ticket) Stack pro water temp or oil pressure gauges, Stack speedo, interested in anything crossflow, or tig welded header tank or washer bottle.
Offers: always open to a sensible offer.

Link to comment
Share on other sites

  • 1 month later...
  • 8 months later...

Interested in the quick release column but need to check measurements etc. It'll be tomorrow afternoon before I get near car

Link to comment
Share on other sites

Interested in the quick release column but need to check measurements etc. It'll be tomorrow afternoon before I get near car

Link to comment
Share on other sites

Interested in the arches

What diameter wheels were they for ?

Link to comment
Share on other sites

also interested in the cycle wings if Blue Ass Fly isn't taking.  I also have a harness for Px.

Link to comment
Share on other sites

Sorry to waste your time Charles. I'm not a 100% sure this will fit mine and not got enough time at moment to get a good look at me car to check.

Link to comment
Share on other sites

Sorry to waste your time Charles. I'm not a 100% sure this will fit mine and not got enough time at moment to get a good look at me car to check.

 

No worries!

 

also interested in the cycle wings if Blue Ass Fly isn't taking.  I also have a harness for Px.

 

Interested in the arches

What diameter wheels were they for ?

 

My car has 185/60R14 (according to web 577.6mm, haven't measured properly, busy day!) and they looked pretty good, I've put one on my spare with an inch thick spacer between tyre and wing to give you an idea what they look like:

 

th_IMG_0544_zps59b3fad5.jpg

Link to comment
Share on other sites

Hi

Interested in the quick release steering column if still available? need to check size

Thanks warren

Link to comment
Share on other sites

Ille pass charles - i want some that will hug 13's

Thanks anyway

Link to comment
Share on other sites

Ille pass charles - i want some that will hug 13's

Thanks anyway

No problem

Wings now SOLD over on Locostbuilders (sorry JOZEIGHT there was quite a list of people for them!)

Everything else still available.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.